JetStor JX Series JBOD Quick Installation Guide
This article provides quick-start instructions for setting up JetStor JX Series JBOD systems. Follow these steps for disk installation, rack mounting, and initial configuration.
Download: JetStor JX Quick Installation Guide
Click here to access the JetStor JX Series Quick Installation Guide (February 2017 edition).
Key Installation Steps:
- Disk Tray Setup: Install LFF/SFF drives into trays and secure with screws
- Rack Mounting: Optional rail kit installation for 2U/3U/4U chassis
- Power Configuration: Connect redundant PSUs and verify LED status
- System Discovery: Use CubeView CMS or CLI for monitoring
Important Notes:
- CAUTION: Use two-person lift for populated 4U/3U systems to avoid injury
- Compatibility: Requires SAS 12Gb/s HBAs or RAID controllers (Broadcom/LSI/ATTO)
- Tip: Wait for controller status LED to turn green before system discovery
Jetstor Support
For assistance with installation or troubleshooting:
📧 support@jetstor.com
🎫 Submit a Support Ticket