XCubeFAS 5200 Hardware Manual for QSAN XEVO-3 Systems
This article provides the official hardware manual for the QSAN XCubeFAS 5200, a high-performance all-flash storage array powered by the XEVO-3 operating system. Includes component overviews, installation guidelines, LED/indicator definitions, and technical specifications for administrators and IT professionals.
Download: XCubeFAS 5200 Hardware Manual
Click here to download the XCubeFAS 5200 Hardware Manual (November 2024 Revision).
Key Sections:
- Front/Rear Panel Layouts: System controls, disk numbering, and component descriptions
- Power Supply Units (PSUs): Redundant PSU installation and LED behavior
- Cache-to-Flash Protection: Data preservation during power loss and module replacement
- Host Cards: Optional Fibre Channel/iSCSI card installation and troubleshooting
Critical Notes:
- WARNING: Host cards are not hot-swappable – remove the controller module before installation to avoid system failure.
- Note: Ensure dual PSUs are connected to separate power sources for redundancy.
Jetstor Support
For assistance with QSAN products:
📧 support@jetstor.com
🎫 Submit Support Ticket