JetStor SAS 812JH JBOD User Guide
This article provides the official user manual for the JetStor SAS 812JH JBOD subsystem, a 2U rackmount storage solution with 12 hot-swappable SAS/SATA drive bays. Includes hardware setup, firmware upgrade instructions, and technical specifications for IT administrators managing mid-density storage environments.
Download: SAS 812JH Manual
Click here to download the JetStor SAS 812JH User Manual (Revision 1.1).
Key Sections:
- Hardware Overview: Front/rear panel layouts, dual JBOD controller modules, and drive carrier lock mechanisms
- Drive Installation: Step-by-step guides for 2.5”/3.5” SAS/SATA HDD/SSD installation in single/dual controller modes
- Firmware Updates: RS-232-based procedures for JBOD controller firmware upgrades
- Technical Specifications: 300W redundant PSUs, environmental tolerances, and SAS3/SATA3 interface details
Critical Notes:
- WARNING: Firmware upgrades require shutting down the server or ensuring no active arrays are running.
- Note: Dual JBOD controllers enhance redundancy – follow rear-panel SAS port labeling for daisy-chaining.
JetStor Support
For assistance with the SAS 812JH JBOD subsystem:
📧 support@jetstor.com
🎫 Submit Support Ticket