JetStor SAS 816F(D) RAID Subsystem User Guide
This article provides the official user manual for the JetStor SAS 816F(D) RAID subsystem, a 3U rackmount storage solution with 16Gb Fibre Channel host connectivity and support for SAS/SATA drives. Includes comprehensive instructions for setup, RAID management, maintenance, and high-availability features.
Download: SAS 816F(D) Manual
Click here to download the JetStor SAS 816F(D) User Manual (Revision 1.0).
Key Sections:
- Hardware Overview: Front/rear panel components, controller modules, and hot-swap disk installation
- RAID Configuration: Step-by-step setup via Telnet, LCD panel, or web-based proRAID Manager
- Advanced Features: Dual-controller redundancy, LUN masking, Fibre Channel topologies
- Maintenance: Firmware upgrades, power supply replacement, and component troubleshooting
Critical Notes:
- WARNING: Ensure ambient temperature does not exceed 40°C (104°F) during operation.
- Note: Hot-spare drives must match or exceed the capacity of the smallest drive in the RAID set.
JetStor Support
For technical assistance with the SAS 816F(D) subsystem:
📧 support@jetstor.com
🎫 Submit Support Ticket