JetStor SAS 824J(D) JBOD User Manual
This article provides the official user manual for the JetStor SAS 824J(D) JBOD subsystem, a 2U rackmount storage solution with 24 hot-swappable SAS/SATA drive bays. Includes setup instructions, firmware upgrade procedures, and technical specifications for IT administrators and storage professionals.
Download: SAS 824J(D) Manual
Click here to download the JetStor SAS 824J(D) User Manual (Revision 1.0).
Key Sections:
- Hardware Overview: Front/rear panel layouts, JBOD controller modules, and drive tray configurations
- Drive Installation: Step-by-step guidance for SAS/SATA HDD/SSD installation in single/dual controller modes
- Firmware Updates: Procedures for upgrading JBOD firmware via RS-232 port
- Component Replacement: Instructions for replacing power supplies, controllers, and fans
- Technical Specifications: Power requirements, environmental tolerances, and interface details
Critical Notes:
- WARNING: Firmware upgrades require shutting down the server or ensuring no active arrays are running.
- Note: Dual JBOD controllers enable redundancy – review cabling diagrams for optimal daisy-chaining.
JetStor Support
For assistance with the SAS 824J(D) JBOD subsystem:
📧 support@jetstor.com
🎫 Submit Support Ticket